ICI Dulux

home  |  about us  |  careers  |  contact us
Colour Themes

Products

Support, Tips & Tools

Promotional
News & Events




Products
Eco-friendly range
Decorative Paints
Interior Wall/Ceiling
Exterior Wall/Roof
Woods/Metal/Floor
High Performance Paints
Interior
Exterior
Product's Brochures
Dulux Weathershield - Protection for Exterior Walls
Select the Painting System
Glidden Colour Ideas
Download Colour Ideas

Colour Inspirations 2010/2011
Download Colour Inspirations 2010/2011

Dulux Weathershield Brochure 2010
Download Dulux Weathershield Keep Cool Brochure 2010


Home : Products : High Performance Paints : Interior : CT Tile Textured Coat

ICI Paints A867-Line (Waterborne)
CT Tile Textured Coat

CT Tile Textured Coat is a texture coat for decorative and protective purposes.

USAGE
Used as a multi-layer texture body coat for internal and exterior wall surfaces.

BENEFITS
Non combustible, heat resistant and smokeless with no emission of poisonous gas when burnt. Highly permeable to substrate providing excellent adhesion. Its micro-granular binder creates an inorganic polymer composite resulting in a high degree of hardness and durability. May be top coated with a variety of top coats.

PACK SIZE 24 kg.

COLOUR RANGE White only



Download Product Information
PERFORMANCE GUIDE
FILM PROPERTIES
Water Resistance

Will tolerate the levels of atmospheric humidity present in normal interior environments and will withstand moderately vigorous washing.
THEORECTICAL COVERAGE
1.10 - 1.70 kg/m²(depending on size of texture).
PRODUCT DATA
COMPOSITION
(nominal)

Pigment : Lightfast Non-Lead Pigments and Mineral Extenders.
Blinder : Silicate based inorganic polymer.
Solvent : Water.

VOLUME SOLIDS
White 75% (nominal)
APPLICATION
THINNING
Airless Spray

Up to 5% with water
CLEANING UP
Clean all equipment with clean water immediately after use.
PRE - APPLICATION
SURFACE PREPARATION
Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax and be thoroughly rubbed down using a suitable abrasive paper and dusted off.
SYSTEM INFORMATION
Powdery Surfaces
PRIMER (1 COAT)

Dulux Adhesion Promoting Wall Sealer (A579 - 15222)
FINISH (2 COATS)

Dulux Weathershield Exterior Wall Finish (A910)
Dulux Aliphatic Urethane Gloss Finish (A388)
PRECAUTION
SAFETY, HEALTHY AND ENVIRONMENTAL INFORMATION

Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
May cause sensitisation by skin contact.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
To remove splashes of paint from skin, use soap and water or a recognised cleanser.
Keep away from food, drinks, animal feed and out of the reach of children.
Container must be stored in a cool and shaded place.
It must be tightly closed in a secure, upright position. Do not breathe dust.
Work in a well-ventilated area and do not breathe in vapour or spray.
A suitable mask should be worn during sanding
When applying paint, it is advisable to wear eye protection and suitable gloves
In case of a spillage, contain and collect spillage using sand or earth and do not empty into watercourses, drains or the environment.
Dispose of any paint waste in accordance with the appropriate Environmental Quality Regulations.
Refer to Dulux Product Safety Data Sheet for further details.
In case of emergency, refer to Emergency Incident Response Hotline 1800 80 6187.

 
Keep seal tightStore in cool placeSecure uprightWear proper protectionEnsure good ventilationPractice proper disposal


An AkzoNobel group of company
Trade Professional
Dulux Trade Paint Specification
Colour Selector
Mouse Painter
Colour Palette4 Explorer
Professional Trade Enquiry
Trade Professional  |  Store  |  Sitemap  |  Legal Notices  |  Colour Accuracy  |  Privacy Policy  |  Other ICI Websites