PERFORMANCE GUIDE
|
FILM PROPERTIES
Chemical Resistance
Heat Resistance
Water Resistance
|
Resistant to mild chemical fume attack but where there is heavy attack, e.g. actual contact with chemicals, a specialist paint system may be required.
Generally resistant to heat up to 350°C.
Resistant to the levels of atmospheric humidity present in normal interior and exterior environments and will withstand repeated washing. Not suitable for use on immersed surfaces.
|
THEORECTICAL COVERAGE
|
A guide to the theoretical coverage which can be achieved under normal conditions is 15 - 21.2 m²/L.
|
PRODUCT DATA
|
COMPOSITION
(nominal)
|
Pigment : Non-Leafing Aluminium.
Blinder : Alkyd.
Solvent : White Spirit.
|
VOLUME SOLIDS
|
53% (nominal).
|
FLASH POINT
|
22°C.
|
APPLICATION
|
THINNING
Brush or Roller
Conventional Spray
|
Ready for use, thinning is usually not necessary.
Ready for use.
|
SPRAY RECOMMENDATIONS
Conventional Spray
|
Satisfactory through most equipment.
|
DRYING TIMES
Touch Dry
Recoat
|
Single coat at standard thickness:
4 - 6 hours
6 hours.
|
CLEANING UP
|
Clean all equipment with Dulux Thinner 850 - 11 immediately after use.
|
FILM THICKNESS
|
Wet: 50 - 65 micro-metres.
Dry: 25 - 35 micro-metres.
|
|
  
|
PRE - APPLICATION
|
SURFACE PREPARATION
|
Surfaces generally must be clean, dry, free from all defective or poorly adhering material, dirt, grease, wax etc. Previously painted surfaces should be thoroughly rubbed down using a suitable abrasive paper and then dusted off. Surfaces should be manually prepared by power or hand tool to BS 7079 Part A1: 1989 St3.
|
SYSTEM INFORMATION
|
PRIMER (1 COAT)
No primer required
|
UNDERCOAT(1 COAT)
No undercoat required
|
PRIMER (2 COATS)
Dulux Heat Resisting Aluminium Finish (A338 - 2554)
|
|
|
 
|
PRECAUTION
|
SAFETY, HEALTHY AND ENVIRONMENTAL INFORMATION
|
FLAMMABLE
Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
Repeated exposure may cause skin dryness or cracking.
Contains: ETHYL METHYL KETOXIME. May produce an allergic reaction.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
To remove splashes of paint from skin, use soap and water or a recognised cleanser.
If swallowed seek medical advice immediately and show this container or label.
Keep away from food, drinks, animal feed and out of the reach of children.
Keep away from combustible material.
Container must be stored in a cool and shaded place.
It must be tightly closed in a secure, upright position.
Work in a well-ventilated area and do not breathe in vapour or spray.
A suitable mask should be worn during sanding
When applying paint, it is advisable to wear eye protection and suitable gloves
In case of fire use foam, dry powder, AFFF, CO2 - Never use water.
In case of a spillage, contain and collect spillage using sand or earth and do not empty into watercourses, drains or the environment.
Dispose of any paint waste in accordance with the appropriate Environmental Quality Regulations.
Refer to Dulux Product Safety Data Sheet for further details.
In case of emergency, refer to Emergency Incident Response Hotline 1800 80 6187.
|
|
      
|
