|
|
|
Home : Products : Decorative Paints : Woods/Metal/Floor : Dulux Timbercolour Acrylic Wood Finish
|
|
Dulux Timbercolour A926 Line (Waterborne)
ACRYLIC WOOD FINISH
|
|
Dulux Timbercolour Acrylic Wood Finish is a highly quality, durable emulsion ideal for direct application to exterior wood surfaces.
USAGE
Dulux Timbercolour Acrylic Wood Finish is ideal for direct application to exterior wood surfaces including fences, barge-boards, facias, exposed balconies, wood walls and cladding. This can also be used direct onto galvanised iron such as gutters and roof sheets.
BENEFITS
Excellent adhesion properties and durability.
Contains light-fast pigments which give a good colour fastness.
Works as an effective mould control.
PACK SIZE 5 litres only.
COLOUR RANGE Refer to Dulux Colour Inspirations.
|
Download Product Information
|
PERFORMANCE GUIDE
|
FILM PROPERTIES
Water Resistance
|
Will tolerate the levels of atmospheric humidity present in exterior environments..
|
THEORECTICAL COVERAGE
|
A guide to the theoretical coverage which can be achieved under normal conditions is 10 - 11 m²/litre.
|
PRODUCT DATA
|
COMPOSITION
(nominal)
|
Pigment : Lightfast Non-Lead Pigments and Mineral Extenders.
Blinder : Acrylic Emulsion.
Solvent : Water.
|
VOLUME SOLIDS
|
35% (nominal), other colours will vary.
|
APPLICATION
|
THINNING
Brush or Roller
Conventional Spray
|
For normal use, thinning is usually not necessary. If required, add up to 1 part of clean water to 10 parts of paint (10%).
Add up to 1 part of clean water to 3 parts of paint (30%).
|
SPRAY RECOMMENDATIONS
|
Satisfactory through most equipment.
|
DRYING TIMES
Touch Dry
Recoat
|
Single coat at standard thickness:
Dependant on temperature and humidity.
2 - 3 hours.
|
CLEANING UP
|
Clean all equipment with clean water immediately after use.
|
|
  
|
PRE - APPLICATION
|
SURFACE PREPARATION
|
Surfaces must be sound, clean, as dry as possible and free from all defective or poorly adhering material, dirt, grease or wax and be thoroughly rubbed down using a suitable abrasive paper in the direction of the grain and dusted off. Clean all of dirt, mould, algae, lichen or moss with a wire brush. On badly affected areas treat with Dulux Fungicidal Wash.
|
SYSTEM INFORMATION
|
PRIMER (1 COAT)
N/A
|
FINISH (2 COATS)
Dulux Timebrcolour Acrylic Wood Finish (A926)
|
|
|
  
|
PRECAUTION
|
SAFETY, HEALTHY AND ENVIRONMENTAL INFORMATION
|
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice
To remove splashes of paint from skin, use soap and water or a recognised cleanser.
Keep away from food, drinks, animal feed and out of the reach of children.
Container must be stored in a cool and shaded place
It must be tightly closed in a secure, upright position
Work in a well-ventilated area and do not breathe in vapour or spray
A suitable mask should be worn during sanding
When applying paint, it is advisable to wear eye protection and suitable gloves
In case of a spillage, contain and collect spillage using sand or earth and do not empty into water courses, drains or the environment
Dispose of any paint waste in accordance with the appropriate Environmental Quality Regulations
Refer to Dulux Product Safety Data Sheet for further details
In case of emergency, refer to Emergency Incident Response Hotline 1800 80 6187.
|
|
     
|
|
|
|
|
|
